| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Type | BZ0.25 | BZ0.5 | BZ1 | BZ2 | BZ3 | BZ5 | BZ8 | BZ10 | |
| Lift Capacity (t) | 0.25 | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 | |
| Max. Lift Height(m) | 3 | 3 | 3 | 3 | 4 | 4 | 6 | 8 | |
| Slew Angle(0) | 360 | 360 | 360 | 360 | 360 | 360 | 360 | 360 | |
| Lift Speed (m/min) | Normal | 4;10;8 | 5;10;8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Slow | 1;2.5;0.8 | 1.25;2.5 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | |
| Level Travel Speed (m/min) | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | |
| Slewing Speed (r/min) | 0.7 | 0.7 | 0.7 | 0.7 | 0.6 | 0.6 | 0.6 | 0.6 | |
| Lift mechanism | wire rope electric hoist or chain electric hoist | ||||||||
| Power supply | 380-420V/3phase/50hz or customized | ||||||||
| Control mode | Pendent push button control or remote control | ||||||||
| Above parameter just for your reference,jib crane can be customized design Max.20t according to your demands. | |||||||||
The QB model series floor mounted jib cranes are designed and constructed for industrial use . The jib crane boom is
fabricated out of a steel "S" or "W" shaped I beam and have removable end stops. A machined lower roller carriage is
housed in the jib crane head section which feature heavy steel side plates.The lower roller carriage is mounted on adjustable
tension bolts to allow 360 dgree field adjustments. The support column for the jib crane is constructed out of steel pipe with
a heavy base plate and reinforcing gussets. This type jib crane can be used both indoor and outdoor places.
It can be operated under three-dimensional environment by pendent push button or remote controller. Compared to other
lifting device, it is superior especially in the case of short-distance and concentrated lifting.
Q1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.Please give us the information as clear as you can, so we can give our best design to suit for your demands.
Q2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.
Q3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
Q4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
Q5:In order to offer the most suitable design solution for you, It will be great helpful if you can offer us the following information to us:
1.Lifting capacity.
2.Span length.(rail center to rail center)
3.Lifting height.(hook center to ground)
4.Have you installed the rails?Do you need us to supply the rails?How long is it?
5.Power supply:Voltage.
6.Working condition:What kind of material to lift?Temperature?
7.It would be much better if it is possible for you to offer the drawing photo of your workshop.
){kind=link}